Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected performance. Fortunately, resetting your Holosun is a straightforward process that can be performed in just a few steps.

• Begin by ensuring your red dot sight is turned on.
• Identify the small button for reset on the rear of the unit.
• Use a thin tool to depress the reset lever for approximately three milliseconds.
• Disengage the switch and your Holosun EPS Carry Red Dot sight will reboot.
• Your red dot sight should now be reverted to its factory settings.

Reset Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to its factory configuration is a breeze. First, determine the tiny button on the side of your optic. Then, press and hold it for around twelve seconds until you see the indicator light How to factory reset holosun eps carry red dot change. Your Holosun EPS Carry is now reverted to its factory settings, ready for precise aiming.

revive your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Simultaneously press and hold the power button for approximately 5 seconds.
• The display will flash, indicating that the reset is in progress.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and verify your sight's functionality. If you encounter any further difficulties, don't hesitate to seek help from Holosun's support.

Revert Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

• Initially, Activate your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• As you continue holding these buttons, press the power button once.
• The display will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Reset All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Restore your Holosun EPS Carry via a Factory Standard Settings

If your Holosun EPS Carry is acting up, a factory reset might be the answer. This will restore your sight to its factory settings, clearing any altered configurations you've made. To accomplish this reset, adhere to these simple steps:

• To begin, find the reset lever on your EPS Carry.
• Then, press a small object, like a toothpick, to depress the reset button.
• While keep the reset switch activated, power on your EPS Carry.
• The sight will display a message indicating that the reset is successful.

After the reset is successful, your EPS Carry will be back to its factory settings.

Report this wiki page